Machine Shop Math – Common Formulas and Strategies

Tooling manufacturers will provide you with suggested numbers whether it be surface feet per minute, chip load per tooth, revolutions per minute, inches per minute or any combination of those and more. It can all get very confusing and overwhelming but don’t quit on me now. I am hoping this post can serve as go-to information for you and your shop, and hopefully I can make some sense of it for you.
Climb Milling vs. Conventional Milling

Think of the flutes (or teeth of the cutter) as pulling the material or CLIMBING through the material. When climb milling, the flute hits the material at the top of the cut, and the thickness of the chip decreases as the flute cuts. This results in the chips being deposited BEHIND the cut, which is important. The chips clear the cutter, which means you are not re-cutting chips. Since you are not re-cutting chips, the result is a better surface finish and longer tool life.
Tool Deflection in CNC Machining

Or why your gauge pin fits nice and snug in the beginning of the hole but won’t quite make it all the way through? The simple answer is tool deflection. Everything bends. And I mean everything. Tool deflection is an omnipresent yet little understood problem. Worry not my fellow machinists, because it is not your fault! There is no eliminating tool deflection, only controlling and minimizing it.
What is High Speed Machining?

A machine can be built with a big motor and rely on heavy mass to provide the force and torque to drive large tools. Or a lighter machine can be developed to work with higher speeds, and a low-force spindle that is specifically designed for micro-tooling. Both types of machines can perform a variety of functions — like milling, engraving, drilling, tapping.